na3D
400 products
-
Add to FavouritesBrass nozzle V6 - Czech Product
Brass nozzle produced by our society in the Czech Republic. The nozzle has an M6 thread, which is the most widespread thread used in 3D printers. The nozzle can be used in several types of 3D printers, most often in printer printers. Made in the Czech Republic.
In stock 100 to 500 pcs
4,06 €
-
Add to FavouritesFan 40 x 40 x 20 - Axial 4020
Axial fan 40 x 20 mm. Multipurpose fan with 24 V power supply. Silent fan with good power.
In stock 100 to 500 pcs
2,42 €
-
8,16 €
70%
Add to FavouritesHumidity indicator
The humidity indicator is used to determine the influence of the surrounding environment on stored goods, e.g. on filaments, it is made of special absorbent paper with impregnation.
In stock 100 to 500 pcs (149 pcs)
2,42 €
8,16 € Discount 70.4%
-
Add to FavouritesDisposable drape - 3 layer
Disposable drape for protection against droplets. Powned clip for better adhesion around the nose.
In stock 500 to 1000 pcs (600 pcs)
1,02 €
-
Add to FavouritesMatrix to T profiles 3030
Matrix for profiles 3030 HS-30 etc. The thread in the matrix is M6 M5 M4 m3. The nuts can be inserted into the profile at any time.
In stock 500 to 1000 pcs
0,25 €
-
Add to FavouritesPlastic bearing RJMP-01-08 LM8UU
Plastic case RJMP-01-08 to silence your printer. With these cases and better drivers, you don't even know the printer is in operation. (The product can be ordered after 1 piece, the photo is only illustrative.)
In stock 500 to 1000 pcs (722 pcs)
1,60 €
-
Add to FavouritesMechanical lever sensor
Minispitch with three pins lever.
In stock >1000pcs (1877 pcs)
0,21 €
-
Add to FavouritesThread insert M2 M3 M4 M5
Threaded inserts from na3D have a special spiral contour that ensures the best possible hold. Inserts made of high-quality brass have excellent thermal conductivity and corrosion resistance.
In stock >1000pcs
from 0,04 €
-
Add to FavouritesArduino Pro Mini
Arduino Pro Mini is used to start the smallest projects.
Sold out
4,47 €
-
Add to FavouritesArduino Mega 2560
Arduino Mega is an ideal board for larger projects that brings new possibilities. Greater performance, more pins, more space for your projects is Arduino Mega 2560. It is a clone with CH340 ballast.
Sold out
12,26 €
-
Add to FavouritesMinitronics v1.1
Smart 3D printer solutions, easy usability and affordability This is minitronics.
Sold out
61,46 €
-
Add to FavouritesHotend 2in1 two-color hotend
Single nozzle hotend for color mixing. 2 colors in one output. Including heating element (40W), thermistor and fan. Voltage according to choice 12 or 24 V.
Sold out
16,36 €
-
Add to FavouritesStepper motor 0.56Nm with integrated T8x8 trapezoid and nut
0.56 Nm stepping motor with integrated T8x8 trapezoidal screw - length 420 mm - including matching nut - it is recommended to replace the nut with a nut with a spring to limit the clearance. Thanks to the integrated screw, you don't have to use flexible couplings or connections with different tubes.
Sold out
26,61 €
-
Add to FavouritesStepstick A4988 - stepper motor controller
Stepstick A4988 - stepper motor controller. Driver A4988 is a basic motor driver. Ideal for beginners and initial tests.
Sold out
2,42 €
-
Add to FavouritesLCD Discount Smart Controller 20x4 2004 Display
The graphics display for a 3D printer allows you to control the printer without using a PC. It includes a memory card reader. 2004 LCD display
Sold out
14,31 €