ePA-GF filament nylon with glass fiber 1.75 mm 1 kg eSUN

【ePA-GF】 ePA-GF or nylon with glass fibers is made of 75% nylon and 25% glass fibers. This material has high strength and stiffness, thanks to which it can be used as a substitute for metal. Self-lubricating properties and wear resistance - suitable for gear printing. High toughness, impact resistance, high temperature resistance, low shrinkage. Temperature resistance up to 120 °C. The material is compatible with most 3D printers.
【Stable Dimensional Tolerance】Minimum tolerance and small shrinkage - ensure consistent feeding and stable prints, no clogging, extremely high printing success, resulting in printed parts that have excellent surface finish and are very accurate. (Depending on the printer)
【No knotting and clogging】 1kg spool. Material with excellent circularity and very small diameter tolerance, does not overlap or tangle. It melts easily, does not crack, does not contain bubbles. Print smoothly and repeatedly without clogging the nozzle or extruder.
【Recommended printing temperature】The nozzle temperature of 260-300 °C will ensure you smooth prints without frequent calibration and less problems with the extruder.
【Vacuum-sealed packaging】 Net weight of material : 1 kg. eSUN's filament comes sealed in a vacuum bag with a desiccant that keeps it dry and free of dust and foreign particles, preventing clogging of nozzles and providing smooth 3D models.

String diameter: 1.75 ± 0.03 mm
Coil Dimension: Diameter 200mm - Width 64mm - Center Hole 57mm
Package size: 216 x 202 x 76 mm
Package weight: 1.48 kg
Nozzle temperature: 260-300℃
Pad temperature: 45 - 60℃
Density: 1.35 g / cm3
Melt Flow Index: 1.45 (220 °C / 2.16 kg) g / 10min
Tensile strength: 76.93 Mpa
Elongation at breaking point: 21.07%
Flexural strength: 77.75 Mpa
Modulus of strength in bending: 1714.63 Mpa
Notch toughness: 14.68 KJ / ㎡
Manufacturer: eSUN