FIBER3D PLA Silk - silk filament 1.75 mm 1 kg

FIBER3D PLA Silk - silk filament 1.75 mm 1 kg

PLA SILK - is a series of PLA with silk colors for beautiful appearance of your prints. Eco-friendly material made from corn starch. Environmentally friendly. Non-toxic and safe. Filament diameter: 1.75 mm ± 0.02 mm. 1 kg - comprises about 390 m of the cord diameter 1.75 mm. Comes in 15 shades. SILK PLA material supply well over 10 m package for 3D pen.

Product variants

  • $20.41 incl. VAT

  • $20.41 incl. VAT

  • $20.41 incl. VAT

  • $20.41 incl. VAT

  • $20.41 incl. VAT

  • $20.41 incl. VAT

  • $20.41 incl. VAT

  • $20.41 incl. VAT

  • $20.41 incl. VAT

  • $20.41 incl. VAT

  • $20.41 incl. VAT

  • $20.41 incl. VAT

  • $20.41 incl. VAT

  • $20.41 incl. VAT

  • $27.23 incl. VAT

$20.41 incl. VAT

Producer: FIBER3D

High quality print materials FIBER3D tags.

is the new line of PLA strings to beautiful satin finish. SILK PLA filament for 3D printer is very hard and when printing does not exclude chemical smell. Like the classic PLA is biodegradable (made of renewable natural resources). PLA material helps to easily print large components.

Description material: PLA, Polylactic acid, a bioplastic polylactic acid made from corn starch. This material has properties similar to those MATERIALS, which were made from crude oil. PLA and PLA SILK is much more environmentally friendly than eg. ABS. It can be dissolved by means of tetrahydrofuran. During prolonged exposure to acetone may cause etching of the surface. Filament PLA is harmless and is also degradable in nature controlled composting. In comparison to the ABS material strength higher, the material is preferably printable. The only disadvantage of this material is inferior heat resistance. PLA can be actively cooled when printing does not need a heating pad. Processing temperature PLA SILK is 190-210 ° C.

Finish PLA: material not easily wear down or put drill holes. It is due to the fact that grinding (the third), or drilling generates heat which causes a "pulling" the fibers of the print. It is therefore appropriate to cool copy (sanded and drilled under water, if necessary. It is advisable to spray the first filler used for modeling, and then sanded and sprayed again, and then again and again until the model for us, perfectly smooth and it eventually airbrush color).

Storage We recommend to ensure a dry environment. Under poor storage in humid conditions absorbs moisture, which is reflected in the press as bubbles on the surface. Keep away from heat.

The main advantages of the material PLA:

  • small shrinkage during cooling-pad is not necessary or heated chamber
  • good quality prints even when printing at high speed
  • soluble in sodium hydroxide
  • biodegradable material

    Weight incl. Packaging: 1.36 kg; The outer diameter of the coil: 200 mm; The diameter of the central bore: 56 mm; Coil width: 64 mm.

    The material is supplied in the href="https://www.na3d.cz/p/2762/vykup-civek-fiber3d" cardboard box , vacuum-packed with silica gel that absorbs moisture.

    Comes in 15 shades.

Color: orange, yellow, green, blue, red, white, bronze, black, grey, pink, gold, silver
Weight: 1 kg
Average: 1,75 mm
Diameter: ± 0,02 mm
Bed temperature: 0 - 60° C
Nozzle temperature: 190 - 220° C

New product question

* (Required)

Alternative products

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Login

This website uses cookies. More info