na3D

Řemenice T2,5-6 16 zubů

Řemenice T2,5-6 16 zubů

Fan 30x30x10 mm

Multipurpose fan with a diameter of 30 mm with power supply 5V, 12V or 24V. Fan 3010

Power supply

Industrial source for powering your printer.

Brass Hotend V6 nozzle

From our nozzles offer you can choose a suitable nozzle for detailed or fast printing. The 0.4-0.5 nozzles are a compromise between quality and print speed.

DISCOUNT SALE

Mini 3D printer - sale

Design and print from the comfort of your home, thanks to the Mini 3D printer.

Thermistor for 3D printer - 1 m cable

Thermometer, thermistor, NTC temperature sensor 100 KOP (+/- 1%) B 3950. Temperature resistance up to 300 ° C. Suitable for 3D printers (for pad and nozzle).

Closed belt GT2-6

GT2 belt loop - width 6mm in length of your choice. The specified length indicates the circumference of the belt and is in millimeters. (The product can be ordered 1 piece at a time, the photo is only illustrative.)

MK8 brass nozzle - Czech Product

Brass nozzle manufactured by our company in the Czech Republic. The nozzle with M6 thread - the most common thread in 3D printers, can be used in several types, the shape corresponds most to the printers Creality, Ender, Anet. Made in Czech Republic.

Reduction to an external stepper motor

With this transition, you can easily connect better step -by -step engine drivers to use stronger and larger engines.

Hardened Volcano nozzle - Czech product

Hardened steel nozzle produced by our company in the Czech Republic. M6 threaded nozzle - the most widespread thread in 3D printers, can be used in several types of printers. Made in the Czech Republic.

Set of modeling tools - spatula

Model stainless steel spatula to remove prints.

Flexible clutch - clamping, firm, flexible clutch

The flexible clutch is used to transmit torque between the rod and the engine. The flexible clutch does not destroy the engine. It helps to easily service interventions. It brings accuracy to assembling your devices. (The product can be ordered after 1 piece, the photo is only illustrative.)

DUPONT extension cables

Extension cables 2 -pin, 3 -pin and 4 -pin available in two lengths. The cable is fitted with a dupont connector - female - female.

A set of drills to clean the nozzles

The set contains 10 pieces of drills with a diameter of 0.2 mm or 0.4 mm used to clean the nozzles. When blocking the nozzle, heat it to about 200 ° C and then clean the clockwise with a gentle circular movements with a drill.

Nozzle cleaning drill

Drill bits with a diameter of 0.2 mm / 0.25 mm / 0.3 mm / 0.35 mm / 0.4 mm / 0.45 mm / 0.5 mm used for cleaning nozzles. If the nozzle is clogged, heat it to approx. 200 °C and then clean it with a drill in gentle circular movements in a clockwise direction.