PLA filaments 1.75 mm Menthol Devil Design 1 kg

PLA filaments 1.75 mm Menthol Devil Design 1 kg

Filaments Polish manufacturer Devil Design are offered in a wide variety of colors, the color of menthol is a novelty since September 2017. The manufacturer guarantees the thickness of the print string of +/- 0.05 mm. We recommend starting with printers who want to print in color without having to buy expensive large coils.

$25.45 incl. VAT

Availability: 1-7 days

Producer: Devil Design

Material PLA is the most commonly used material for printing technology FDM, and suitable for printing large objects.

1 kg coil is vacuum-packed together with a desiccant and placed in a cardboard box with a label with information about the recommended temperature settings for the print.

packaged bobbin weight 1.4 kg.

Suitability PLA:

PLA is easily printed, is biodegradable (and thus environmentally friendly). But it is a material that is not suitable for outdoor use, degrades and becomes brittle when exposed to UV radiation. It is also heat resistant. Already at 30 ° - 50 ° C prints soften and deform. It is therefore not appropriate to carry copies in automobiles. PLA is a combustible material. Therefore, we recommend you do not leave the printer when printing with the material long-term unattended.

Finish PLA - the material can not be easily abraded by grinding (rubbing) generates heat that causes the "pulling" of the fibers printout. Therefore, it is suitable for manual grinding printout cool eg. That it will grind under water. For the same reason it is difficult to print drill holes (again problem with heating). The material should be sprayed first filler (used for modeling) and then sanded, sprayed again and again and again until the model for us, perfectly smooth, and then airbrush paint. The resulting model can also be inserted into the "omlílačky" along with shells, stones, remnants of filaments, pieces prints and get rid of unwanted bugs and debris aid under.

Bonding PLA : glue with activator spray (sometimes even themselves sufficient glue).

Recommended print settings PLA : To print just the use of commonly used nozzles (brass). The nozzle diameter is chosen according to the fineness of the surface of what we want to achieve, respectively. by force adjustment layers to print. This optimum setting exists recount formula, no less just simple rule: +/- 0.2 mm - ie. When we layer thickness of 1.25, should not have a larger diameter than the nozzle 0,3 mm . At higher layers we use a nozzle with a larger diameter, thinner with less contrast.

Temperature Washers - keeps the heat is not required or only for better adhesion of material to the substrate to 50 ° C.

Recommended settings: Print Temperature: 208 ° , retraction of 0.8 mm, speed 60 mm / s (outline 70%) layer of 0.2 - 0.05mm. When using a printer with the PEI film must be well degreased washer. The resultant printout is smooth and rather glossy without visible errors.

Print material PLA to support - appropriate support for copies are made of the same material ie PLA or PVA (voděrozpustný material) is not suitable for HIPS.

To Storage We recommend to ensure a dry environment. Under poor storage in humid environment will absorb moisture, which is manifested as bubbles during printing on the surface.

Color: green
Weight: 1 kg
Average: 1,75 mm
Diameter: ± 0,05 mm
Bed temperature: 0 - 60° C
Nozzle temperature: 190 - 220° C

New product question

* (Required)

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Login

This website uses cookies. More info