Menu
FIBER3D PLA Filament 1.75 mm 1kg

FIBER3D PLA Filament 1.75 mm 1kg

Ecological material is made of corn starch. Environmentally friendly. Non-toxic and safe. Filament diameter: 1.75 mm ± 0.02 mm. Package 1 kg - contains about 335 m strings with a diameter of 1.75 mm. Supplied in a wide range of colors 38 shades. We also supply PLA material after 10m packs for 3D pens. Read more

Color

In stock >10pcs

19,96 €

Producer: FIBER3D

Description

Quality printing material brand FIBER3D guarantees trouble-free printing.

PLA Filament For use in 3D printers is very strong and does not exclude chemical odor when printing. PLA is biodegradable - made of renewable natural resources. PLAs help to print large components more easily.

Note: Blue color has a more matte appearance.

Material description: PLA, Polylactic acid is a bioplastic made of corn starch with the same properties as plastic made of oil. This plastic is much more gentle in nature than ABS. Tetrahydrofuran soluble, possible long-term exposure to acetone can cause the surface to etr. PLA is not healthy and is degradable in nature -controlled composting. Compared to ABS, the material strength is higher, the material is better printable, and the only disadvantage is the lower temperature resistance. PLA can be actively cooled during printing, it does not need a heated pad. The PLA processing temperature is 190 - 220 ° C.

PLA: The material cannot be easily sanded, grinding (friction) produces heat that causes "pulling" fibers from prints. Therefore, it is advisable to cool the printout for example by grinding it underwater. For the same reason, holes are difficult to drill into the print (again the problem with warming up). It is advisable to spray the material first (used in modeling) and then grinds, spray again and over and over until the model is perfect for us and then spray it with paint. The resulting model can also be inserted into the "tissue" along with shells, stones, remnants of filaments, or pieces of prints.

Storage: We recommend securing a dry environment. In poor storage in a humid environment, it absorbs moisture, which manifests itself as bubbles on the surface. Protect from heat.

Main advantages of PLA:

  • simple setting for printing
  • small shrinking in cooling - no heated pad or chamber
  • good print quality even when printing at high speed
  • soluble in sodium hydroxide
  • biodegradable material
  • weight incl. Packaging: 1,36 kg; Outer coil diameter: 200 mm; Center hole diameter: 75 mm; Coil width: 64 mm.

Empty coil weight approx: thinner 130 g, coarser 144 g, transparent 132 g

Weight flow: 7 - 9 g/10 min (190 ° C)

Material is supplied in > Cardboard box, or without a box, vacuum wrapped with a silica gel that absorbs moisture.

Supplied in a wide range of colors 25  shades - White, Black, Grey, Blue, Beige, Skin, Yellow, Green, Orange, New Orange, Brown, Army Green, Grass Green, Plant Green, Sky Blue, Gray Blue, Pink, Fuchsia, Cyan, Light Gold, Gold, Transparent, Transparent red, Transparent green, Transparent yellow

Additional information

Category: PLA
Color: transparent, purple, orange, yellow, green, blue, red, beige, white, black, grey, brown, pink, natural, natural, gold, multicolor, silver
Weight: 1 kg
Average: 1,75 mm
Diameter: ± 0,02 mm
Bed temperature: 0 - 60° C
Nozzle temperature: 190-230°C
FIBER3D PLA Filament 1.75 mm 1kg
FIBER3D PLA Filament 1.75 mm 1kg

19,96 €

Alternative products

  • Ecological material made of corn starch. Environmentally friendly. Non-toxic and safe. Filament diameter: 1.75 mm ± 0.02 mm. Package 5 kg - contains about 1675 m strings with a diameter of 1.75 mm. Supplied in a wide range of colors.

    Availability: In stock <10pcs

    61,65 €

    79,95 € Discount 22.9%

  • Repurchase of undamaged spools from FIBER3D strings. We are the first string manufacturer to recycle spools and boxes for filaments, and we have been purchasing them since 2020.

    Availability: Repurchase

  • Made of corn starch. Environmentally friendly. Non -toxic and safe. Filament diameter: 1.75 mm ± 0.02 mm. The package contains 10 m strings with a diameter of 1.75 mm. Supplied in a wide range of colors 39 shades. We also supply PLA material in a 1 kg package.

    Availability: In stock <10pcs

New product question

Captcha

i

Do you need advice on choosing goods?

We're here for you

+420 572 155 055 

(Mo - Th 8:00 - 15:00, Fri 8:00 - 14:00)


info@na3D.eu

Login

Forgotten password

Privacy preferences

We use cookies to improve your visit to this website, to analyze its performance and to collect data about its use. We may use third party tools and services to do so and the data collected may be passed on to partners in the EU, the US or other countries. By clicking on "Accept all cookies", you agree to this processing. You can find detailed information or adjust your preferences below.

Privacy declaration

Show details
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Login

Forgotten password

Product has been added to the cart
Continue shopping Order