Filaments
-
Special
Categories of special materials with different additives.
-
Add to FavouritesEASY PLAYENT White 1,75mm Fiberlogs 2500g
Easy PLA is one of the most widely used 3D printing materials, as the name suggests for its easy use. This filament lasts quite a lot and its properties allow printing of very accurate and complicated elements.
1-7 days (10000000 pcs)
64,58 €
-
Add to FavouritesEASY PLALAMENT Black 1,75mm Fiberlogs 2500g
Easy PLA is one of the most widely used 3D printing materials, as the name suggests for its easy use. This filament lasts quite a lot and its properties allow printing of very accurate and complicated elements.
1-7 days (10000000 pcs)
62,36 €
-
Add to FavouritesEASY PLAYENT Graphite gray 1.75mm Fiberlogs 2500g
Easy PLA is one of the most widely used 3D printing materials, as the name suggests for its easy use. This filament lasts quite a lot and its properties allow printing of very accurate and complicated elements.
1-7 days (10000000 pcs)
64,58 €
-
Add to FavouritesFILAMENT-PM PP FILAMENT Natural Ppjet 1,75mm Filament PM 0,5kg
SoftJet - PP (polypropylene): Material similar to rubberjet (or rubber). The material is characterized by very good mechanical properties and can withstand a higher temperature than ABS or PLA material (higher softening temperatures). It is also resistant to chemicals.
1-7 days (10000000 pcs)
17,83 €
-
Add to FavouritesFiberflex Filament Graphite Gray 30D 1,75mm Fiberlogs 850g
Fiberflex is a thermoplastic elastomer with a hardness of 30D Shore, which can be printed at a speed of up to 45 mm/s. This rubber material can be extended to 680 % of the original size. Thanks to its material properties, it is destined for use to places that require frequent bending.
1-7 days (10000000 pcs)
39,93 €
-
Add to FavouritesFIBERFLEX FILAMENT White 30D 1.75mm Fiberlogs 850g
Fiberflex is a thermoplastic elastomer with a hardness of 30D Shore, which can be printed at a speed of up to 45 mm/s. This rubber material can be extended to 680 % of the original size. Thanks to its material properties, it is destined for use to places that require frequent bending.
1-7 days (10000000 pcs)
50,35 €
-
Add to FavouritesFIBERFLEX FILAMENT Blue 30D 1.75mm Fiberlogs 850g
Fiberflex is a thermoplastic elastomer with a hardness of 30D Shore, which can be printed at a speed of up to 45 mm/s. This rubber material can be extended to 680 % of the original size. Thanks to its material properties, it is destined for use to places that require frequent bending.
1-7 days (10000000 pcs)
43,87 €
-
Add to FavouritesFIBERFLEX FILAMENT Black 30D 1.75mm Fiberlogs 850g
Fiberflex is a thermoplastic elastomer with a hardness of 30D Shore, which can be printed at a speed of up to 45 mm/s. This rubber material can be extended to 680 % of the original size. Thanks to its material properties, it is destined for use to places that require frequent bending.
1-7 days (9999999 pcs)
43,87 €
-
Add to FavouritesEASY PLAIMENT ONYX 1,75mm Fiberlogs 850g
Easy PLA is one of the most widely used 3D printing materials, as the name suggests for its easy use. This filament lasts quite a lot and its properties allow printing of very accurate and complicated elements.
1-7 days (10000000 pcs)
22,88 €
-
Add to FavouritesPLALAMENT refill black 1,75mm fiberlogs 850g
Fiberlog refill is an environmentally friendly solution because it is a string without a coil. The Easy Pla Refill is the same as the classic Easy PLA, which is one of the most commonly used print materials. The simplicity of the press should satisfy the hobby printers and professionals.
Sold out
18,45 €
-
Add to FavouritesPet-G Filament 2.85 mm Black Devil Design 1 kg
PET-G is a solid and tough material that is characterized by good temperature stability. Devil Design print strings are made in a wide range of colors.
1-7 days (10000000 pcs)
22,35 €
-
Add to FavouritesFILAMENT-PM PLA PLACHOP MARCH Light 1.75 mm 0,5kg Filament PM Marble
Material with pigment particles. The prints then resemble a stone. The print strings of the Czech brand Filament PM, which falls under the company Plasty Mladeč, belong to quality materials and guarantee trouble -free printing.
1-7 days (10000000 pcs)
17,83 €
-
Add to FavouritesFILAMENT-PM PLA PLACHOP MARCH Dark 1.75 mm 0,5kg Filament PM Marble
Material with pigment particles. The prints then resemble a stone. The print strings of the Czech brand Filament PM, which falls under the company Plasty Mladeč, belong to quality materials and guarantee trouble -free printing.
1-7 days (10000000 pcs)
17,83 €
-
Add to FavouritesEASY PLAYENT VERTIGO 1,75mm Fiberlogs 850g
Easy PLA is one of the most widely used 3D printing materials, as the name suggests for its easy use. This filament lasts quite a lot and its properties allow printing of very accurate and complicated elements.
1-7 days (10000000 pcs)
20,58 €
-
Add to FavouritesNylon PA12 Natural 1,75mm 750g Fiberlogs
Due to resistance to high temperatures, alcohol and chemicals, nylon is particularly suitable for mechanical and technical applications. It is extremely durable, solid, unbreakable and flexible.
1-7 days (10000000 pcs)
43,62 €