【ABS Luminous】ABS Luminous glows in the dark. Filament with higher strength, toughness and better resistance to heat, wear and impact. The material is compatible with most 3D printers.
【Stable Dimensional Tolerance】Minimum tolerance and small shrinkage - ensure consistent feeding and stable prints, no clogging, extremely high printing success, resulting in printed parts that have excellent surface finish and are very accurate. (Depending on the printer)
【No knotting and clogging】Material with excellent roundness and very small diameter tolerance, no overlapping or tangling. It melts easily, does not crack, does not contain bubbles. Print smoothly and repeatedly without clogging the nozzle or extruder.
【Recommended printing temperature】The nozzle temperature of 220-260 °C will ensure smooth prints without frequent calibration and fewer problems with the extruder.
【Vacuum-sealed packaging】 Net weight of material : 0.5 kg. eSUN's filament comes sealed in a vacuum bag with a desiccant that keeps it dry and free of dust and foreign particles, preventing clogging of nozzles and providing smooth 3D models.
- string diameter: 1.75 ± 0.03 mm
- coil size: diameter 200 mm - width 38 mm - center hole 57 mm
- pack size: 216 x 202 x 76 mm
- weight Package: 0.9 kg
- nozzle temperature: 220-260 ℃
- pad temperature: 90-110 ℃
- density: 1.04 g / cm3
- melt Flow Index: 12 (220 ° C / 10kg) g / 10min
- tensile strength: 43 MPa
- extension at a quarry point: 22%
- bend strength: 66 MPa
- fault strength module: 2348 MPa
- notch toughness: 19 kj / ㎡
- deformation temperature: 78 (° C, 0.45MPA)
- manufacturer: eSUN
Additional information
| Category: | ABS |
| Color: | blue, svítící ve tmě |
| Weight: | 0,5 kg |
| Average: | 1,75 mm |
| Diameter: | ± 0,03 mm |
| Bed temperature: | 90 - 110° C |
| Nozzle temperature: | 220-260°C |
16,98 €