Menu
Filament-PM Woodjet print string Natural 1.75 mm 0.5 kg Filament PM

Filament-PM Woodjet print string Natural 1.75 mm 0.5 kg Filament PM

Filament-PM Woodjet print string Natural 1.75 mm 0.5 kg Filament PM Read more

1-7 days

24,21 €

Producer: Filament-PM

Description

Woodjet is a mixture of PLA+ and sugar cutlets

  • lower printing temperature 195 ° C, thanks to which it is suitable for bridging and printing overhangs
  • higher layer grip and impact toughness - ie. that the printed object is more flexible
  • Wooden look
  • stronger in three -point bend

print settings
nozzle: 210 ° C
heated pad: 60 ° C

We recommend a nozzle of 0.6 mm and larger.

Advantages :
✅ Lower print temperature 195 ° C
✅ higher toughness
✅ Suitable for printing large models
✅ ) Appearance
✅ Better post-processing

Disadvantages < /Span>:
❌ Fragrance
❌ low temperature resistance
0.6 mm

How was Woodjet originated?

Thanks to the long -term project in cooperation with the Technical University of Liberec ( Institute for the Nanomaterials Advanced Technology and Innovation), some secondary raw materials of agricultural production Agricultural cooperative Haňovice, which is FILAMENT PM part.

At the beginning, four secondary vegetable raw materials were selected, and straw, coconut substrate from hydroponically grown tomatoes, tomatoes and sugar cuttings . The whole test process began on the material ABS , where the perfection was verified This test came out best sugar cuttings and tomatoes . The next step was to fill these two fillers into the plane . Everything has been tested on 5 types of polymer Pla , and from which was selected the best variant , which has become Woodjet .

General O Pla:

Press strings of Czech brand Filament PM, which falls under the company Plasty Mladeč, belongs to quality materials and guarantee trouble -free printing. In production, laser measurement of material thickness is used to ensure a constant string diameter along its entire length. These strings are protected by a double cover against UV radiation and in each package there is a drying bag that prevents possible moisture on the material. Print strings are made in a wide range of colors.

Suitability of using PLA:

Plated is easy to print, is biodegradable (thus environmentally friendly). However, it is a material that is not suitable for outdoor use, degrades and fragile when exposed to UV radiation. It is also not temperature resistant. Already at 30 - 50 ° C prints soften and deform. Therefore, it is not advisable to carry prints in cars. PLA is a flammable material. Therefore, we recommend that you do not leave the printer when printing with this material unattended for a long time.

Plastal finish Pla - the material cannot be easily sanded, grinding (friction) produces heat that causes "pulling" fibers from prints. Therefore, it is advisable to cool the printout for manual grinding, for example by grinding it underwater. For the same reason, holes are difficult to drill into the print (again the problem with warming up). It is advisable to spray the material first (used in modeling) and then grind, spray again and over and over until the model is perfect for us and then spray it with paint. The resulting model can also be inserted into the "tumblers" along with shells, stones, remnants of filamers pieces of prints ...

bonding Pla : second glue with spray activator (sometimes the second glue itself)

Recommended Pla : To print, you just need to use commonly used nozzles . The nozzle diameter is chosen according to the softness of the surface we want to achieve or according to the layer force setting during printing. There is a conversion pattern for this optimal setting, but a simple rule of +-0.2mm - ie. If we want a layer thickness of 1.25, the nozzle should not be more than 0.3 mm. For larger layers we use a nozzle with a larger diameter at weaker on the other hand with smaller ones.

For storage we recommend securing a dry environment. In poor storage in a humid environment, it absorbs moisture, which manifests itself as bubbles on the surface.

outer coil diameter 200 mm, height 55 mm. The weight of the empty coil is 0.204 kg, the weight of the coil including the packaging 0.84 kg. The print string is wound on black coil, plastic vacuum packaging, cardboard box and one more plastic packaging.

The amount of PLIAMENT fibers per 1kg coil is about 330 meters. The value is approximate as even the diameter of the string can fluctuate according to the tolerance given by the manufacturer. For Mladeč plastics it is +- 0.05mm.

Eng

Filament from the Czech Brand Filament PM WHICH FALLS UNDER The Plastic Mladeč Company Belongs to Quality Materials Providing Trouble-Free Printing. The Use Laser Measurement of the Thickness of the Material During the Production, WHICH ENSURES and CONSTANT DIAMETER OF THE FILAMENT Among Its Entire Length. And Double Cover Protects Filament Against UV Radiation, and There Is A Drying Bag in Each Package, WHICH PROTECTS The Material From Possible Moisture Effects. Filaments Are Produced in A Wide Range of Colors.

Pla White Filament Is and Universal Material for 3D FDM Printing Technology Suitable for Printing Large Objects. It is the Most Commonly Used Material for 3D Printers Without the Need to Use and Heated Bed.

when and How to use plastic:

PLA is easily printable and it is biodegradable (Therefore Environmentally Friendly). However, IT is not a Material That Is Suitable to Be Used Outdoors, Because in Such Case It Degrades and Brittle Uv Light. Also, IT is not heat resistant. Even at temperatures 30 - 50 ° C The material softens and deforms. For That Reason, IT Is Not Recommended to Drive With Such Outprints in the Car. PLA is and Flammable Material. DUE TO THAT FACT IT IS RECOMMANDED NOT TO LEAVE THE PRINTER UNATTENDED

Pla Surface Treatment - This Material Is Not Easily Sanded, While Grinding (FRICTION) IT Generates Heat and That Causes The Fibers to "Pull" From the Print. THEREFORE, WHEN SANDING BY HAND, IT IS RECOMMANDED TO COOL The Printout, for Example by Sanding Underwater. For the same reasson, it is also difficult to drill holes in the printout (Again, and Heating Problem). It is suitable to spray the material with and Filler First The Resulting Model Can Be Also Inserted Into The “Saucepan” Along with the Shells, Stones, Remnants of Filaments, and Pieces of Prints ...

PLA and GLUE: Instant Glue With Spray Activator

Recommended Setting for Pla Material: Commonly Used Nozzles Are Suitable. Diameters Can Be Chosen According to the Fineness of the Surface Which We Want To Achieve or According to the Setting of the Layer Thickness During Printing. You can use and Simple Conversion Formula for This Optimal Setting. The Rule is + - 0.2 mm is enugh - IE if we want and Layer Thickness of 1.25, The NAZZLE DIAMETER SHOULD NOT BE GREATE THAN 0.3 mm. If there is and Larger Layer, Use and Larger Diameter of the NAZZLE, for Weaker Ones, Use and Smaller One.

Heated Bed Temperature - Warming is Not Required p>

for storage, it is highly recommended to use and Dry Environment. When Stored Poorly and In A Humid Environment, IT Absorbs Moisture WHICH RESULTS IN BUBBLES ON THE SURFACE WHEN PRINDED.

COIL OUTER DIAMETER 200 mm, Width 55 mm. Spool Weight IS 0.204 kg, Spool Weight Including Packaging 0.84 kg. The Printing String Is Wound On A Black Spool, In A Plastic Vacuum Package, and Cardboard Box, and Another Plastic Package.

The amount of plastic per 1 kg spool is About 330 Meters. The Value is Approximate As the Diameter of the String Can Vary According to the Tolerance Specied by the Manufacturer. In this specific case (plastic Mladeč) IT IS +- 0.05 mm.

Additional information

Category: Wood filaments
Color: wood
Weight: 0,5 kg
Average: 1,75 mm
Diameter: ± 0,05 mm
Bed temperature: 60°C
Nozzle temperature: 195 - 210°C
Filament-PM Woodjet print string Natural 1.75 mm 0.5 kg Filament PM
Filament-PM Woodjet print string Natural 1.75 mm 0.5 kg Filament PM

24,21 €

New product question

Captcha

i

Do you need advice on choosing goods?

We're here for you

+420 572 155 055 

(Mo - Th 8:00 - 15:00, Fri 8:00 - 14:00)


info@na3D.eu

Login

Forgotten password

Privacy preferences

We use cookies to improve your visit to this website, to analyze its performance and to collect data about its use. We may use third party tools and services to do so and the data collected may be passed on to partners in the EU, the US or other countries. By clicking on "Accept all cookies", you agree to this processing. You can find detailed information or adjust your preferences below.

Privacy declaration

Show details
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Login

Forgotten password

Product has been added to the cart