FIberFlex is a thermoplastic elastomer with a hardness of Shore 30D which can print at 45 mm / sec. The rubber material can be extended up to 680% of the original . Moreover, it is highly resistant to impact at low temperatures, a well Odolov abrasion and chemicals. Thanks to its material properties is designed for use on sites that require frequent bending. It is very suitable for gadgets (gagdgety) and rubber machine parts and fasteners. Span> p>
p>
strings Weight: 0.85 kg p>
span> printing temperature: 200 ° C - 220 ° C
substrate temperature: 50 ° C - 70 ° C (heating is not necessary for special types of washers or the use of means of increasing adhesion substrate, such as adhesive tape and the Kapton 3Dlac and others ..)
diameter tolerance: +/- 0.02 mm
roundness tolerance: + 0.01 mm span> p>
Color: | beige |
Weight: | 0,85 kg |
Average: | 1,75 mm |
Diameter: | ± 0,02 mm |
Bed temperature: | 0 - 60° C |
Nozzle temperature: | 190 - 220° C |
Hardness: | 30 ShD |