na3D

Extol filament splitters

Splitters for aligning the string for easier insertion into the extruder. The ideal angle for inserting the strings is 45°.

Step motor 0.49 Nm for Prusa MK3S/mini +

X axis stepper motor with cable length 40 cm and Y axis - longer cable - 50 cm for MK2, MK2S, MK3, MK3S, MK3S+ printers. For the mini printer, make sure the cable length you need.

Multi material upgrade kit - ERCF for Voron

The MMU compatible for VORON Switchwire, VORON Trident, VORON 2.4 R2 versions can also be used on any Klipper and RRF based 3D printer.

BLV MGN Cube 3D printer

The BLV MGN Cube 3D printer features scientific linear rails (MGN rails) that offer overall stiffness, precision and are much smoother than a linear bearing or Delrin.

Stepper motor 0.12Nm Nema

Stepper motor with a power of 0.12Nm, serves as an alternative replacement for the SX17-1005VLQCEF motors. The motor is suitable for use on all axes.

Step motor 0.42 nm

Step motor with a thickness of 0.42nm. The engine is suitable for use on all axes.

NEW

CO2 laser engraver 40 W 300 x 200 mm

The K40 40W CO2 laser engraving machine is equipped with a 40W laser tube of cooled water, precise step engines and a high -quality control board. Using a USB port, it can be connected to a PC or laptop.

Fan 30x30x10 mm

Multipurpose fan with a diameter of 30 mm with power supply 5V, 12V or 24V. Fan 3010

3DLAC - Spray for better adhesion of prints to pad

Special lacquer for 3D printers for enlargement grip spray 400 ml. It is sufficient for more than 600 spraying pads (the advantage is that it is not necessary to re-apply before each printing with a properly applied first layer). In case of dissatisfaction we offer a refund within 30 days.

3 mm roller thermistor with JST XH connector

HT-NT100K thermistor in roller design. At the end there is a JST XH connector - MKS boards, Anet board, GT25602 cable length variants.

Thermistor for 3D printer - 1 m cable

Thermometer, thermistor, NTC temperature sensor 100 KOP (+/- 1%) B 3950. Temperature resistance up to 300 ° C. Suitable for 3D printers (for pad and nozzle).

MK8 brass nozzle - Czech Product

Brass nozzle manufactured by our company in the Czech Republic. The nozzle with M6 thread - the most common thread in 3D printers, can be used in several types, the shape corresponds most to the printers Creality, Ender, Anet. Made in Czech Republic.

Hardened nozzle V6 - Czech Product

Steel hardened nozzle produced by our company in the Czech Republic. The M6 ​​threaded nozzle - the most widespread thread in 3D printers can be used in several types, the most used in the printer. Made in the Czech Republic.

Plastic nut T8x2 - POM nut

Replacement plastic nut for a trapezoidal screw with a diameter of 8 mm.

POM plastic nut for trapezoidal screw T8 T8x8 with spring

Spare nuts for trapezoidal screw with a diameter of 8 mm. T8 climb 8 mm. The matrix is ​​4 walking. With a spring like in the photo. (The trapezoid bolt in the photo is only for illustration.)