High quality print material marks FIBER3D, guaranteeing trouble-free printing.
Material Description: PLA Polylactic acid, polylactic acid bioplastic is produced from corn starch with the same properties as the plastic made from petroleum. This plastic is much more environmentally friendly than eg. ABS. Soluble using tetrahydrofurane, or long exposure to acetone may cause etching of the surface. PLA is not insanitary and is degradable in nature controlled composting. In comparison to the ABS material strength higher, the material is preferably a printable, only disadvantage is a lower temperature resistance. PLA can be actively cooled when printing does not need a heating pad. PLA is the processing temperature from 190 to 220 ° C.
Finish PLA: material can not be easily abraded by grinding (rubbing) generates heat that causes the "pulling" of the fibers printout. Therefore, it is suitable for manual grinding printout cool such that it will grind under water. For the same reason it is difficult to print drill holes (again problem with heating). The material should be sprayed first filler (used for modeling) and then sanded, sprayed again and again and again until the model for us, perfectly smooth and then sprayed with paint. The resulting model is also possible to insert into "omílačky" along with the shells, stones, pieces or residues of filaments prints.
Storage: We recommend to ensure a dry environment. Under poor storage in humid conditions absorbs moisture, which is reflected in the press as bubbles on the surface. Keep away from heat.
The main advantages of the material PLA:
- simple settings for printing
- small shrinkage during cooling - it is not necessary heated pad or chamber
- good quality prints even when printing at high speed
- soluble in sodium hydroxide
- biodegradable material
Available in a wide range of colors 33 colors.