Tools
-
Round brush with brass fibers with a 3 mm shaft for clamping in a dremmel or drill. With the brush, you can easily remove dirt from your nozzle and other parts of your 3D printer.
Availability: In stock 10 to 100 pcs
1,23 €
-
Drill bits with a diameter of 0.2 mm / 0.25 mm / 0.3 mm / 0.35 mm / 0.4 mm / 0.45 mm / 0.5 mm used for cleaning nozzles. If the nozzle is clogged, heat it to approx. 200 °C and then clean it with a drill in gentle circular movements in a clockwise direction.
Availability: In stock 10 to 100 pcs
0,81 €
-
0,21 €
-
Filament cutter with simple use. Suitable for PTFE hoses of all diameter 2 3 4 6 mm
Availability: In stock 10 to 100 pcs
2,94 €
-
Pliers to strip cables and cut the teflon tube.
Availability: In stock 10 to 100 pcs
1,66 €
-
Kettle pliers with round tips. Suitable for wire and fine workshop work.
Availability: In stock 10 to 100 pcs
3,36 €
-
Digital sliding scale for 0-150 mm with a large LCD display, zero settings in each position and automatic shutdown after 5 minutes of inactivity. Plastic Surgers for Orientation Fast Measurement
Availability: On demand
10,59 €
-
Set of model chips suitable for cleaning the model from support or possible uneven prints.
Availability: In stock <10pcs
8,47 €
-
With a torque wrench, you can tighten the nozzle quickly and accurately. You will improve the quality of the hotend assembly and prevent unwanted filament leakage around the thread. Using a preset torque, always tighten the nozzle with the same force.
Availability: Sold out
34 €