FIBER3D PLA filament 1.75 mm 5 kg

FIBER3D PLA filament 1.75 mm 5 kg

Eco-friendly material made from corn starch. Environmentally friendly. Non-toxic and safe. Filament diameter: 1.75 mm ± 0.02 mm. 1 kg - comprises about 390 m of the cord diameter 1.75 mm. Comes in a wide range of colors 33 shades. PLA material supply well over 10 m package for 3D pen.

Product variants

  • 77,96 € incl. VAT

  • 77,96 € incl. VAT

  • 77,96 € incl. VAT

  • 77,96 € incl. VAT

  • 77,96 € incl. VAT

  • 77,96 € incl. VAT

77,96 € incl. VAT

Producer: FIBER3D

High quality print material marks FIBER3D, guaranteeing trouble-free printing.

to use 3D printer is a very hard and when printing does not exclude chemical smell. PLA is biodegradable - made from renewable natural resources. PLA helps to easily print large components.

Material Description: PLA Polylactic acid, polylactic acid bioplastic is produced from corn starch with the same properties as the plastic made from petroleum. This plastic is much more environmentally friendly than eg. ABS. Soluble using tetrahydrofurane, or long exposure to acetone may cause etching of the surface. PLA is not insanitary and is degradable in nature controlled composting. In comparison to the ABS material strength higher, the material is preferably a printable, only disadvantage is a lower temperature resistance. PLA can be actively cooled when printing does not need a heating pad. PLA is the processing temperature from 190 to 220 ° C.

Finish PLA: material can not be easily abraded by grinding (rubbing) generates heat that causes the "pulling" of the fibers printout. Therefore, it is suitable for manual grinding printout cool such that it will grind under water. For the same reason it is difficult to print drill holes (again problem with heating). The material should be sprayed first filler (used for modeling) and then sanded, sprayed again and again and again until the model for us, perfectly smooth and then sprayed with paint. The resulting model is also possible to insert into "omílačky" along with the shells, stones, pieces or residues of filaments prints.

Storage: We recommend to ensure a dry environment. Under poor storage in humid conditions absorbs moisture, which is reflected in the press as bubbles on the surface. Keep away from heat.

The main advantages of the material PLA:

  • simple settings for printing
  • small shrinkage during cooling - it is not necessary heated pad or chamber
  • good quality prints even when printing at high speed
  • soluble in sodium hydroxide
  • biodegradable material

The material is supplied in the cardboard box , vacuum-packed with silica gel that absorbs moisture.

Available in a wide range of colors 33 colors.

Color: yellow, blue, red, white, black, natural, natural
Weight: 5 kg
Average: 1,75 mm
Diameter: ± 0,02 mm
Bed temperature: 0 - 60° C
Nozzle temperature: 190 - 220° C

New product question

* (Required)

Alternative products

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.


This website uses cookies. More info