INNOVATEFIL Nylon PA / CF filament black 1.75 mm 500 g

INNOVATEFIL Nylon PA / CF filament black 1.75 mm 500 g

INNOVATEFIL Nylon PA / CF filament black 1.75 mm 500 g

72 € incl. VAT

Availability: 1-7 days

Producer: Innovatefil

The resistance, which retains its excellent properties even at high temperatures. Combinations of polyamide (nylon) and carbon fiber enables printing of large objects without distortion.

The main advantages of this filament is undoubtedly the ability to withstand long-term temperatures of around 150 ° C. Also it has great adhesion between the layers, which gives the printed piece great durability and so there is no distortion even at the press section of larger dimensions.

Specifications
- Diameter: 1.75 mm (± 0.03)
- Operating temperature: 240-260 DEG C.
- substrate temperature: higher than 60 ° C
- printing speed: 30-50 mm / sec

temperature resistance:
Maximum working temperature - Prolonged exposure: 150 ° C Maximum temperature
- short-term exposure to 180 ° C

sizes: M 500 g Recyclable

TIPS AND RECOMMENDATIONS FOR PRINTING



    • MOISTURE PROTECTION



      Innovatefil® PA FC is supplied in a vacuum container which provides excellent protection against moisture. Before closing the packaging, the fiber is subjected to stringent quality control dehumidifying the raw material, which is secured humidity is less than 0.02%.

      After unpacking advisable to keep it in a dry and dark prostředí.Jinak material can absorb up to 0.5% of humidity, which subsequently will vaporize during extrusion, causing poor surface finish.

      To maintain optimum printing conditions is recommended before using the material in fiber 3D printer to dry. Many printing devices already contains these drying systems.



        • Recommended for filaments with carbon fiber



          The carbon fibers makes the print string very abrasive, so it is necessary to use a hardened steel or other hardened nozzle variations, which prevents premature wear.

          It is recommended to use a nozzle at least 0.6 mm diameter and a height of the print layer be set to 0.2 mm or greater. Failure to follow these recommendations could result in clogged nozzles.



            • EXTRUDER KEEP IN GOOD CONDITION



              Once printing is complete, it is advisable to clean the nozzle. If printing of a plurality of different types of material, it is appropriate to consider replacement of the nozzle for each material to prevent its mixing.

              for barrels recommended to use the cleaning string SmartFile CLEAN .

Color: black
Weight: 0,5 kg
Average: 1,75 mm
Diameter: ± 0,03 mm
Bed temperature: 60 - 100° C
Nozzle temperature: 240 - 260° C

New product question

* (Required)

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Login

This website uses cookies. More info