SmartFile SMART STICK product for better grip 100 ml

SmartFile SMART STICK product for better grip 100 ml

Smart Stick adhesive liquid preparation (100 ml) is specially developed for printing polypropylene. Since polypropylene due to its chemical composition, poorly after

$11.82 incl. VAT

Availability: 1-7 days

Producer: Smartfil

Smart Stick adhesive liquid preparation (100 ml) is specially developed for printing polypropylene. Since polypropylene due to its chemical composition very poorly associated with most existing materials, prints it or not adhered well to the print surface. Smart Stick but acts as an interface between the material and the base, and thus ensures the necessary adhesion.

Smart Stick do not have to be used only for PP, it is a universal product. It is compatible with most existing materials on the market. It can be used for ABS, HIPS, PLA, PETG, PP, PA and others.

It lasts more than 100 applications. It is soluble in water and thus easy to clean.

Manual

first Removal of sealing foil
Before first use, it is necessary to remove the wheel from seals that prevent drying out and spill during transport. Unscrew and remove the applicator cap sealing foil.
second Product applications
Apply a press pad continuous thin film which ensures adhesion to the print substrate. Once the product is applied, it is recommended to reseal the bottle so that the internal liquid does not dry out, causing contamination of the applicator.
3rd Print Model
Smart Stick is a product that works with printers with heated and unheated press pad. In the case of a heating pad ideal temperature of about 70-90 ° C. For prints that require very high degree of adhesion, it is recommended to increase the temperature of the press at 90-100 ° C for the first layer to achieve great material from adhering to the adhesive. For additional layers it is possible to reduce the temperature to 70 ° C, to increase the capacity of the structural adhesive.
4th Removing the pattern of the substrate
Once the piece is printed, the connection between the material very strong, so recommended to wash water to the diluted formulation and thus reduce the grip. Subsequently, peel off the copy in the usual way, for example, using a spatula.
5th Cleaning pads
It is often possible to use another layer to retain the previous print and achieve equally good results. However, once the coating layer is damaged, it must be restored. In this case, surface of the pad, wash with hot water in order to weaken the adhesive layer and then removed using a spatula. We recommend using the product onto the glass or the removable substrate, whereby the cleaning process easier.

New product question

* (Required)

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Login

This website uses cookies. More info