Quality printing material brand Fiber3D .
PC material for printing On 3D printers are the thermoplastics. It can be found virtually anywhere, especially it can be recommended for technical applications in the electrical engineering and automotive industry.
Material description: PC, polycarbonate, is the hardest plastic used for 3D printing. It has very good impact resistance and good heat resistance. The advantage of this material is to maintain flexibility even cold. The disadvantage is the higher melting point of the material. The greatest use is found for printing transparent prototypes. PC is very often used in conjunction with ABS material, or is its alternative, mainly due to the similar properties that the PC offers. Along with the material Nylon and ASA, it is one of the worst printable materials of all available. Work temperature 250 - 280 ° C.
Product you print using polycrabonate is characterized by high resistance (high hardness, temperature resistance up to 150 ° C, abrasion), but also low weight.
Storage: Keep dry. Protect from heat.
Main advantages of PC material:
- stiffness, high temperature resistance
Weight incl. Packaging: 1,36 kg; Outer coil diameter: 200 mm; Central hole diameter: 56 mm; Coil width: 64 mm.
Mass flow : 30 - 35 g/10 min (280 ° C)
Material is supplied in cardboard box or without a box, vacuum wrapped together with silica gel that absorbs moisture.
Available in the color of the transparent.