Contents of the original package 500 ml - a little taken for testing, exp. 7/4/2024
The spray is suitable for treating objects that are shiny, reflective or very dark.
An even layer of minimal thickness is sprayed onto the model to create a white surface. The 3D matting spray is anti-reflective and can be easily removed with water or a brush.
WARNING
Do not inhale the spray! Use the spray outdoors only and/or use respiratory protection (fine dust).
The spray can attack very sensitive materials or get stuck on a rough surface. A permanent change (e.g. fading) of the surface cannot be ruled out! Therefore, first try spraying and removing small stains or worthless objects.
Safety instructions:
P102 - Keep out of the reach of children.
P210 - Keep away from heat, hot surfaces, sparks, open flames and other sources of ignition. No smoking.
P211 - Do not spray on open flames or other sources of ignition.
P251 - Do not puncture or burn even after use.
P271 - Use only outdoors or in well-ventilated areas.
P305+P351+P338 - IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if worn and if they can be removed easily. Continue rinsing.
P410+P412 - Protect from sunlight. Do not expose to temperature exceeding 50°C/122°F.
Warning notices:
H222 - Extremely flammable aerosol.
H229 - Container under pressure: may burst when heated.
H319 - Causes serious eye irritation.
H336 - May cause drowsiness or dizziness.
25,28 €