Accessories for 3D printing
Accessories
-
Add to FavouritesAllen key
Allen key for tightening the pulley.
In stock <10pcs
0,21 €
-
Add to FavouritesMetal clip 19 mm
Suitable if you need to attach glass, paper, fabric or other substrate to print on the printer pad.
Sold out
0,37 €
-
Add to FavouritesCoil large
Spare spool for 1 kg of filament, suitable for e.g. rewinding a badly wound spool. The photo is for illustration only, a coil of different manufacturers will be supplied according to current availability. Coil diameter 20 cm, inner diameter 5.3 cm.
In stock
0,61 €
-
Add to FavouritesCleaning needle
Needle to clean nozzles 0.2 mm and larger.
In stock <10pcs
0,62 €
-
Add to FavouritesIMBUS 2.5 mm with a ball
Imbus with a ball for wide use and in less accessible places. Made of quality steel, hardened.
Sold out
0,61 €
-
Add to FavouritesNozzle cleaning drill
Drill bits with a diameter of 0.2 mm / 0.25 mm / 0.3 mm / 0.35 mm / 0.4 mm / 0.45 mm / 0.5 mm used for cleaning nozzles. If the nozzle is clogged, heat it to approx. 200 °C and then clean it with a drill in gentle circular movements in a clockwise direction.
In stock <10pcs
0,78 €
-
Add to FavouritesTextile braid on cables
Textile sleeve for printer cables, cut lengthwise. On the extruder cables or on the pad cable.
In stock 10 to 100 pcs
from 0,78 €
-
Add to FavouritesFilter 190 microns
A filter that relieves your used resin rigid residues. By spilling over the filter, Resin cleans up and is re -ready for the next SLA / DLP 3D printing.
In stock 10 to 100 pcs (20 pcs)
0,78 €
-
Add to FavouritesPhotocentric Filter for Resin 400 micron
Photocentric Filter for Resin 400 micron
1-7 days (10000000 pcs)
0,82 €
-
Add to FavouritesNylon tightening sleeve for cables
Protection of your cables! With nylon sleeves you tie cables to ensure their protection.1 piece = 1 meter
In stock 100 to 500 pcs
from 1,02 €
-
Add to FavouritesBowden clutch safety ring
The insurance ring will serve to ensure the correct position of the bowden clutch. The package contains 5 pieces.
In stock <10pcs (9 pcs)
1,02 €
-
Add to FavouritesDisposable drape - 3 layer
Disposable drape for protection against droplets. Powned clip for better adhesion around the nose.
In stock 500 to 1000 pcs (600 pcs)
1,02 €
-
Add to Favouritescoil small 330g
Replacement coil for 330g 3D filament, suitable for example to rewrite poorly wound coils. Inner diameter 5.2cm, external 16cm. It is not a new product.
1-7 days (10000000 pcs)
1,02 €
-
Add to FavouritesNozzle cleaning brush - rotary
Round brush with brass fibers with a 3 mm shaft for clamping in a dremmel or drill. With the brush, you can easily remove dirt from your nozzle and other parts of your 3D printer.
In stock 10 to 100 pcs (81 pcs)
1,19 €
-
Add to FavouritesKORES - adhesive 15 g - stick adhesive
Adhesive stick for all kinds of paper and cork. Smooth application, first -class quality, does not leave traces. Long life - adhesive stick does not dry up!
Sold out
1,19 €