Menu
Prussa Research 3D Printer Original Prusa i3 MK3S

Prussa Research 3D Printer Original Prusa i3 MK3S

Prussa Research 3D Printer Original Prusa i3 MK3S Read more

Ask first

1190,97 €

Description

- heated magnetic pad with replaceable printing plates with PEI surface
- new Eins Rambo motherboard
- Tiché Trinamic Drivery with 256 micro-products
- Faster print: 200+ mm /s
- Rellers Homing for X and Y axes
- Detection and recovery from layer displacement
- Increased frame stiffness with reinforcements from extruded aluminum - Better cooling from both sides of the object
- Optional Wi-Fi connection with OctoPrint support
- Folding wheels from Bondt- Filament is shifted from both sides
- Optical sensor recognizes the presence and movement of string
- Automatic stretching of the newly established strings
- SPACE Extruder recognition
- Extruder fan and print fan monitor speed speed. When the extruder fan is blocked, the printer stops printing to prevent damage to the extruder. The same applies to a print fan.
- a very quiet Noctua fan 2 with built-in thermistor = faster temperature calibration
- thermistor to control the ambient temperature for electronics

Technical parameters:
/>- Large workspace- 11.025 cm3 (25 x 21 x 21 cm)
- Integrated LCD, SD card printing (8 GB in package) or from PC via USB />- 0.4 mm nozzle (easy to replace) for 1.75 mm Filament
- layer height from 0.05 mm
- automatic calibration of the printing area br />- automatic compensation of inaccurate compound axes of printing area
- maintenance-free printing area- no glass, no glue, no ABS juice
- supported materials- & gt; PLA, ABS, PET, HIPS, FLEX PP, NINJAFLEX, LAYWOOD, LABRICK, NYLON, BAMBOOFILL, BRONZEFILL, ASA, T-GLAS, FILAMENTS WITH NACE, POLYKARBONAT ...

1 kg Pla string free



In the new MK52 magnetic pad, high -temperature magnets are hidden to keep special print steel plates in place. We offer three types of plates - steel printing plate with smooth double -sided PEI surface, double -sided steel printing plate with glossy powdered PEI surface and double -sided steel printing plate with granular PEI surface (which is in the basic package). Other types of plates will be possible to buy later.


frame stiffness



One of the qualities that customers asked for most was the improvement of the frame stiffness. Therefore, the MK3S printer has a completely redesigned Y -axis from extruded aluminum. It is therefore the same rigidity of the frame as other printers. At the same time, 10 mm on the Z -axis is added, so it is possible to print up to 210 mm.


quieter and faster print



Thanks to the new Trinamic2130 drivers and the Noctua fan, the MK3S is extremely quiet in the so -called "stealth mode. But even in normal mode prints are quieter than 99% of available printers. In addition, in normal mode is increased print speed. Now you reach a speed of more than 200 mm/s!



width =


Also, it has ever happened to you that you inadvertently wound on the power cord and have lost 20 hours of printing? MK3S will save you in these cases! The printer can fully recover from energy loss. The special sensor recognizes the interruption of the power supply and immediately turns off the heating of the pad and the extruder. You can continue printing after restoring the energy supply.




The MK3S is a completely rebuilt extruder and a new filament sensor. The optical sensor is switched by a simple mechanical lever and therefore does not matter the optical properties of the filament as in previous models. The sensor is also much more resistant than before.


Detection of the shifted layers


Thanks the new EINSY RAMBO with Driver Trinamic, the MK3S is not only quiet but can handle even Detect the displacement of the layers . This increases the overall reliability of the printer and of course user comfort. You can finally say goodbye to ugly prints!


extruder bondtech



Extruder is also improved by original feed wheels from Bondtech. Their advantage is that they push out the filament from both sides, so they increase the power of extrusion and, above all, the reliability of the printing, which you will appreciate especially in flexible filaments. Also the print fan now cools the print from both sides!


probe P.I.N.D.A. 2



MK3S has two new thermistors. The first measures the temperature of the surrounding electronics and helps to prevent the MINTEMP errors in rooms where the temperature drops below 15 ° C. The second we built into the probe of P.I.N.D.A. 2 and we can compensate the temperature drift, so the first layer will always remain in place!


nozzle E3D V6



E3D V6 is a popular all -metal nozzle known mainly for its reliability at high temperatures. The MK3S uses specially modified Heatbreak developed together with E3D. The nozzle has already proven its reliability in Multi Material upgrade and is still able to ensure great performance in a surprising small package.

More from category

Prussa Research 3D Printer Original Prusa i3 MK3S
Prussa Research 3D Printer Original Prusa i3 MK3S

1190,97 €

New product question

Captcha

i

Do you need advice on choosing goods?

We're here for you

+420 572 155 055 

(Mo - Th 8:00 - 15:00, Fri 8:00 - 14:00)


info@na3D.eu

Login

Forgotten password

Privacy preferences

We use cookies to improve your visit to this website, to analyze its performance and to collect data about its use. We may use third party tools and services to do so and the data collected may be passed on to partners in the EU, the US or other countries. By clicking on "Accept all cookies", you agree to this processing. You can find detailed information or adjust your preferences below.

Privacy declaration

Show details
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Login

Forgotten password

Product has been added to the cart
Continue shopping Order