Filament PLA PM-printing copper wire 1.75 mm 2 kg Filament PM

Filament PLA PM-printing copper wire 1.75 mm 2 kg Filament PM

Press strings Czech brand Filament PM, which falls under the company Mladeč Plastics are among the high-quality materials and ensure trouble-free printing. Is employed in production

$49.50 incl. VAT

Availability: 1-7 days

Producer: Filament-PM

Press strings Czech brand Filament PM, which falls under the company Mladeč Plastics are among the high-quality materials and ensure trouble-free printing. Is employed in production of laser thickness measurement which is secured string of constant diameter throughout its length. These strings are protected by a dual shield against UV radiation, and each package is present in a desiccant pouch which prevents possible moisture material. Press strings are manufactured in a wide variety of colors.

PLA copper wire press is a universal material for the FDM technology of printing, suitable for printing large objects. It is the most widely used material for 3D printing without having to heat the printing plate.

Suitability PLA:

PLA filament is easily printed, it is biodegradable (and therefore environmentally friendly). But it is a material that is not suitable for outdoor use, degrades and becomes brittle when exposed to UV radiation. It is also heat resistant. Even at 30-50 ° C prints soften and deform. It is therefore not appropriate to carry copies in automobiles. PLA is a combustible material. Therefore, we recommend you do not leave the printer when printing with the material long-term unattended.

Finish PLA - the material can not be easily abraded by grinding (rubbing) generates heat that causes the "pulling" of the fibers printout. Therefore, it is suitable for manual grinding printout cool such that it will grind under water. For the same reason it is difficult to print drill holes (again problem with heating). The material should be sprayed first filler (used for modeling) and then sanded, sprayed again and again and again until the model for us, perfectly smooth and then sprayed with paint. The resulting model can also be inserted into the "omílačky" along with shells, stones, pieces of filaments remains copies ...

Bonding PLA : glue with activator spray (sometimes even themselves sufficient glue)

Recommended print settings PLA : To print just the use of the commonly used nozzles . The nozzle diameter is chosen according to the fineness of the surface that we want to achieve, or by force adjustment layers to print. For optimum force setting scaling pattern layer exists, however, a simple rule is sufficient that the depth is 25% -75% of the diameter of the nozzle. Simply, if you have 0.4 mm nozzle to apply it to half the height of a layer 0.2 mm or in the range 0.1 mm - 0.3 mm.

Temperature Washers - keeps the heat is not required or only for better adhesion of material to the substrate to 50 ° C.

Recommended settings: printing temperature: 210 DEG C , retraction of 0.8 mm, speed 60 mm / s (outline 70%) layer of 0.2 mm - 0.05 mm. When using a printer with the PEI film must be well degreased washer. The resultant printout is smooth, slightly shiny without visible errors.

Storage We recommend to ensure a dry environment. Under poor storage in humid environment will absorb moisture, which is manifested as bubbles during printing on the surface.

The print string is wound on a spool of black, in a plastic vacuum packaging, cardboard box, and yet another polythene bag.

Quantity PLA fiber filament on the spool 2 kg is approximately 660 meters. The value is approximate because the diameter of the cord may vary according to the tolerance indicated by the manufacturer. AT Plastics Mladeč it is + - 0.05 mm.

Color: copper
Weight: 2 kg
Average: 1,75 mm
Diameter: ± 0,05 mm
Bed temperature: 0 - 60° C
Nozzle temperature: 190 - 220° C

New product question

* (Required)

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Login

This website uses cookies. More info