na3D
507 produktů
-
Přidat k OblíbenýmV6 Volcano brass nozzle
Brass nozzle with M6 thread for Volcano hotend.
Skladem < 10 ks
zł11,73
-
Přidat k OblíbenýmBall bearing 606ZZ
Bearing with one row of balls in deep orbits. It transmits radial and axial load. Size 6x17x6. (The product can be ordered after 1 piece, the photo is only illustrative.)
Skladem < 10 ks (1 ks)
zł2,55
-
Přidat k OblíbenýmBall bearing 624ZZ
Ball bearing 624 ZZ with an inner diameter of 4mm. (The product can be ordered after 1 piece, the photo is only illustrative.)
Skladem < 10 ks (9 ks)
zł3,23
-
Přidat k OblíbenýmBall bearing with flange F6000ZZ
Ball bearing with flange size 10x26x8 mm. (The product can be ordered after 1 piece, the photo is only illustrative.)
Skladem < 10 ks (6 ks)
zł8,33
-
Přidat k OblíbenýmLM20UU linear bearing
Extended linear bearing suitable for assembly into a wide range of printers. Suitable for guide rods with a diameter of 20 mm. (The product can be ordered by 1 pc.)
Skladem < 10 ks (10 ks)
zł21,93
-
Přidat k OblíbenýmLM6UU linear bearing
Linear bearing suitable for mounting in a wide range of printers. (The product can be ordered after 1 piece, the photo is only illustrative.)
Skladem < 10 ks (3 ks)
zł4,93
-
Přidat k OblíbenýmSilicone Protection of Volcano Hotend
Protection against dirt aluminum cube Volcano.
Skladem < 10 ks (8 ks)
zł8,33
-
Přidat k OblíbenýmTrolley for linear lines
Additional trolley for linear lines. MGN12H size, MGN12C, MGN9H, MGN9C - the difference in length and width see the gallery.
Skladem < 10 ks
zł50,83
-
Přidat k OblíbenýmMK10 all-metal upgrade
For Flashforge printers.
Skladem < 10 ks (10 ks)
zł42,33
-
Přidat k OblíbenýmTorque wrench with nozzle attachments
With a torque wrench, you can tighten the nozzle quickly and accurately. You will improve the quality of the hotend assembly and prevent unwanted filament leakage around the thread. Using a preset torque, always tighten the nozzle with the same force.
Skladem < 10 ks
zł135,83
-
Přidat k OblíbenýmBrass Bowden Quick Coupler PC4-M6 CR10
Pneumatic quick coupler for 4 mm diameter bowden - 2.5 mm internal bore, M6 thread.
Skladem < 10 ks (1 ks)
zł10,03
-
Přidat k OblíbenýmPad spring for MK3
Spring for heated pad MK3. Length 25 mm. Outer diameter 8 mm, inner diameter 4 mm. (The product can be ordered 1 piece at a time, the photo is only illustrative.)
Skladem < 10 ks
zł4,93
-
Přidat k OblíbenýmCR10S for the nozzle
Spare nozzle CR10S Pro for Filaments 1,75. The nozzle has a finer thread than the classic M6 nozzles.
Skladem < 10 ks
zł21,93
-
Přidat k OblíbenýmHotend 2 V nozzle 2 V 1 0.4 / 1.75 mm
Spare nozzle for Hotend 2 V 1 0.4 / 1.75 mm.
Skladem < 10 ks (8 ks)
zł16,83
-
Přidat k OblíbenýmMK8 steel nozzle
Steel nozzle with M6 thread. Available in size 0.2 / 0.3 / 0.4 / 0.5 / 0.6 / 0.8 mm.
Skladem < 10 ks
zł16,83