na3D

A set of drills to clean the nozzles

The set contains 10 pieces of drills with a diameter of 0.2 mm or 0.4 mm used to clean the nozzles. When blocking the nozzle, heat it to about 200 ° C and then clean the clockwise with a gentle circular movements with a drill.

Nozzle cleaning drill

Drill bits with a diameter of 0.2 mm / 0.25 mm / 0.3 mm / 0.35 mm / 0.4 mm / 0.45 mm / 0.5 mm used for cleaning nozzles. If the nozzle is clogged, heat it to approx. 200 °C and then clean it with a drill in gentle circular movements in a clockwise direction.

Sensor for calibration of Bltouch pad original Antclabs

Original BLTOUCH V3.1 sensor for automatic calibration of the printing area.

Magnetic heated pad MK52

HeatBed heated magnetic pad for printers - Prusa MK3S

Heatbreak hotbreak

Replacement heatbreak for printers Průša, Anet, Rebel, etc. Several variants of dimensions.

Set spring, bolt and radiated nut

Spring for alignment of heating pad. Set spring with screw and radiated nut.

Hotend 2.0

Bowden Hotend ideal for multi-headed printers. Thanks to the round heatbreak, the height is easy to adjust. The heating cube contains a hole for a roller thermistor. Hotend contains a nozzle 0.4/1.75.

Kapton tape

Kapton tape for preparing the printing mat. With kapton you get a glossy surface of the first layer.

T8x8 trapezoidal screw

A trapezoidal screw has more precise manufacturing tolerances than classic metric threads. The screw is of size T8x8 - 4 running thread. Without nut - a choice of a classic nut or a nut with a spring to limit the clearance.

Pulley GT2-6

Pulley for belt GT2 - 6 (belt width 6 mm). Pulley dimensions according to size selection. (The product can be ordered 1 piece at a time, the photo is only illustrative.) GT2-6 idler pulley.

Hardened V6 hotend nozzle

Nozzle for hotend with M6 thread. Can be used in hotend E3D, 3Draty, Ultimaker and others.

AKCE VÝPRODEJ

Valerie 3D printer - sale

Create 3D objects from the comfort of your home. Thanks to the 250 x 220 x 260 print envelope, you can materialize any of your ideas. Main benefits: high-quality heated mat (heats to 110°C in 1 minute), automatic shutdown, continued printing after a power failure, filament end detection, WiFi, automatic cleaning of the nozzle with a brush, 3.5" LCD touch screen.

Volcano aluminum cube

Spare heating block for nozzles E3D V6 Volcano. The cube has a screw for thermistor insurance.

V6 Volcano brass nozzle

Brass nozzle with M6 thread for Volcano hotend.

Ball bearing 606ZZ

Bearing with one row of balls in deep orbits. It transmits radial and axial load. Size 6x17x6. (The product can be ordered after 1 piece, the photo is only illustrative.)