Quality printing material brand FIBER3D guaranteeing trouble-free printing.
Spla Filement for use in 3D printers is very solid and does not exclude chemical odor when printing. Large components are easier to print from this material.
Material description : PLA, Polylactic acid, polylontic acid is bioplastic made of corn starch with the same properties as plastic made of oil. This plastic is much more gentle on nature than ABS. Tetrahydrofurene soluble, possible long-term exposure to acetone can cause the surface to etrane. It is not healthy and is degradable in nature-controlled composting. Compared to ABS, the material strength is higher, the material is better printable, the only disadvantage is the lower temperature resistance. PLA can be actively cooled during printing, it does not need a heated pad. PLA processing temperature is 210 - 230 ° C.
Storage : We recommend securing a dry environment. In poor storage in a humid environment, it absorbs moisture, which manifests itself as bubbles on the surface. Protect from heat.
- small shrinking in cooling - no heated pad or chamber
- good print quality even when printing at high speed
- biodegradable material
Mass flow : 3 - 6 g/10 min (190 ° C)
Supplied in several colors.
20 meter sample (+/- 1 meter-packed manually)
Warning: samples are intended for immediate use.
|Color:||transparent, purple, orange, yellow, green, blue, red, white, black, grey, natural|
|Diameter:||± 0,02 mm|
|Bed temperature:||0 - 60° C|
|Nozzle temperature:||210 - 230° C|