Try out the latest news in the world of three-dimensional printing! P>
SmartFile ABS Magneto - detectable by all types of detectors, even in very small quantities.
This special filament for 3D Printing It was designed to be detectable by any type of automatic switch even in very small quantities.
These properties are particularly suitable for the food industry, where it is necessary absence of contaminants of any origin and redeem it for the production of sensors, intelligent packaging, etc. In addition, the 3D printing fiber high dimensional stability. May be in contact with food, resists moisture and fungi. P>
Unlike other materials available on the market filled with ferromagnetic powders ABS MDT all detectable metal detectors available on the market as a permanent magnet, as well as the latest detectors with balanced coils. The composition does not require the use of steel fibers or metal powders. It does not contain carbon fibers, graphite or soot. Therefore, during printing, to the ABS material MDT no undesirable release of the hardly identifiable particles (or dust) that might disperse in the working environment, and contaminate the process or the finished products. P>
It is necessary to print using of the nozzle minimum diameter, .6 mm aa layer height greater than 0.2 mm, to prevent accidental blockage of the extruder.
After printing, we recommend using a print string CLEAN to avoid coloring these prints.
Diameter: 1.75 mm (± 0.03)
Operating temperature: from 260 to 280 ° C
substrate temperature: 90 DEG C P>
pack sizes: M 750 g
Large packs XL 3.3 kg, 5.6 kg XXL, XXXL 7 kg are available on order to be delivered 2-6 weeks.
biocompatible. Recyclable. Magnetically detectable. P>
This material may come into contact with food. Strong>
Meeting the demanding requirements for the FCM (Food Contact Material) is documented in a Statement compliance with EU Regulation 1935/2004 and other European regulations. This statement can be found here: contact with food material p>
Data sheets span> p>