Hard - hardness 77ShD span> p>
hard Photocentric resin brand is perfect for making articles where it is desirable extremely hard copy which does not deform even at higher power load. This type of UV resin has moderate shrinkage (2%). Cure takes place quickly. The prints have a very good tensile strength, high Vicat softening temperature, and have almost no elongation. Span> Hard Photocentric UV resin are produced in different colors: black, transparent, gray and white. Strong> span> p>
span> p>
span> p>
Wavelength for cure for DLP printer 385 nm.
are available on request and printable resin on a laser printer, 3D, where the curing of the resin at 405 nm wavelength.
strong> span> p>
strong> More menu UV resins from Photocentric: span> p>
Hard resin is decomposable for objects that under larger force are slightly elastically deformed. Copies will be easy to bend and stretch the use of force. Prints are strong in tension and of limited extension. Span>
Hardness: 65 ShD strong> span> li>
Copies of flexible polymer are still tough but flexible . The printout can easily be bent or compressed and goes back to its original form. Low tensile strength and higher elongation are typical Flexi polymer. Span>
Hardness: 85 ShA strong> span> li>
castable photopolymer is specially designed to create qualitatively superior forms. To burn leaves almost no ash. When the firing temperature increases is gasified resin to prevent the pressure increase in casting. It will remain dry very detailed surface ideal for your form. Span>
Hardness 75 ShD strong> span> li>
products are solid, but exhibit good flexibility, strength, good tensile properties and shear strength, low shrinkage. After compression, returns to its original position. Span>
Hardness: 80 ShD strong> span> li>
the prints exhibit a high tensile strength, low elongation and low shrinkage. Objects will not bend. Span>
Hardness: 60 ShD strong> span> li>
Ul>