SBS T-soft filament Orange 750 g 1.75 mm filament

SBS T-soft filament Orange 750 g 1.75 mm filament

SBS T-Soft is a semi-flexible material available in transparent and solid colors. The main advantage is that it can be dissolved in d-limonene or xylene also (commercially available diluent S6005). It is thus possible to modify the surface and achieve a similar smoothing such as ABS with acetone.

$52.27 incl. VAT

Availability: 1-7 days

Producer: Filamentarno

SBS T-Soft is a semi-flexible material available in transparent and full color. The main advantage is that it can be dissolved in d-limonene or xylene also (commercially available diluent S6005). It is thus possible to modify the surface and achieve a similar smoothing such as ABS with acetone.

Material Properties: easy printing, a constant fiber diameter, partial elasticity, glass transition temperature 80st.C, printing does not smell, there is no plastic and turbidity after Botulinum diluent or d-limonene can achieve perfect smoothing, transparency and appearance of the glass. The layers together very well kept and prints are (subject to adjustment) waterproof. The material does not absorb moisture. When printing shrinks slightly from 0.2 to 1.2%.

Recommended settings for printing

extruder temperature: 215 DEG C

substrate temperature: 60 ° C substrate treated ABS juice PVA juice, or juice Tsoft optionally href="https://www.na3d.cz/doplnky_3d_tisk/dimafix-sprej/"> Dimafixem .

Nozzle: No special nozzles (brass), recommended diameter of 0.4 mm for normal printing, "your" mode at least 0.6 mm

Print speed: up to 60-80 mm / s.

Recommendations for "your" mode: 0.8 mm nozzle, 0.2 mm thick, a speed of 15 mm / s, the flow enhancement 110% . This gives you a nice uniform thick wall. Thus, most of us printed bottles proved to be watertight.

must then copy rub, splatter or spill d-limonene, or diluent, until the thin film does not cover the print. Then it is necessary to copy complete drying e.g. hairdryer (after prolonged exposure to D-lemunenu would print began to dissolve).

WARNING : When using solvents is necessary, caution is recommended to perform outdoors or in well-ventilated areas and veil over her mouth.

More about SBS materials can be read HERE. < / P>

Color: transparent, orange
Weight: 0,75 kg
Average: 1,75 mm
Diameter: ± 0,05 mm
Bed temperature: 70 - 90 ° C
Nozzle temperature: 220 - 240° C

New product question

* (Required)

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Login

This website uses cookies. More info