INNOVATEFIL natural PEEK filaments 1.75 mm 400 g

INNOVATEFIL natural PEEK filaments 1.75 mm 400 g

style = "text-align: justify;"> SmartFile INNOVATEFIL PEEK:

340 € incl. VAT

Availability: 1-7 days

Producer: Innovatefil


PEEK (polyetheretherketone) keeps its mechanical properties up to 250 ° C and is resistant to a wide range of chemicals. Thanks to this highly specialized polymer ideal for demanding operating environments. PEEK is commonly used in the automotive and aerospace industries for the production of pipes, seals, bearings and brackets. The print wire has a tensile strength of 98 MPa, a flexural modulus of 3.8 GPa, and the impact strength (Notched Izod) of 8 kJ / m 2 . The values ​​of the mechanical properties of printed parts differ depending on the shape, structure and the filling. The parts can be annealed after printing.


- in keeping with its mechanical properties tolerates continuous temperatures up to 250 ° C!
- is resistant to most chemicals (except for sulfuric acid and strongly oxidized media)
- has very good resistance to UV
- the melting of the material occurs at 343 ° C.
- Hardness Shore D 84.5

- Diameter: 1.75 mm (± 0.03)

- Operating temperature: 400 C
- Barrel temperature: & gt; 120 C

Before buying this high-temperature polymer filament, please make sure that your device allows these temperatures Printing !

Recommendations to print:

PEEK is a high temperature thermoplastic suitable for demanding applications and as such it is difficult to print. The temperature of the press is 400 C, together with the printing substrate temperature of 120 ° C. Printing in a closed box is not necessary, but to achieve minimizing deformation and protection from drafts recommend to print. Due to print at high temperatures is important carefully balanced bed and compliance Managing distance of the nozzle to the ground and 300-400 microns with the height of the first print layer thickness of 300 microns. When properly adjusted to prevent nozzle clogging or melting the structure. For printing PEEK platform is generally used because it is easier to remove it from the bed than with a flat bottom portion. Fiber should be stored in an environment free from moisture, since moisture can seriously affect print quality. If the bubbles during printing, the humidity level is too high 3D filament. Drying is performed at 150 ° C for 3-4 hours. To improve the properties of the material can be PEEK annealed after printing in conventional manner.

sizes: S 400 g

Recyclable. May come into contact with food.

Color: natural
Weight: 0,4 kg
Average: 1,75 mm
Diameter: ± 0,03 mm
Bed temperature: 120° C
Nozzle temperature: 400 ± 30° C

New product question

* (Required)

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.


This website uses cookies. More info