Popis
Step engine cable with DUPONT connector here.
Cables can be differently colored!
Více z kategorie
Cable of step engine JST XH
zł6,63
zł5,48 bez DPH
Alternativní produkty
-
Přidat k OblíbenýmStepper motor cable DUPONT
Cable for motors 0.28 Nm, 0.44 Nm, 0.56 Nm. 1 meter cable to the stepper motor. The cable is equipped with terminals. On one side the end for the motor, on the other side DUPONT (mainly RAMPS plates).
Skladem 10 až 100 ks (56 ks)
zł6,63
-
Přidat k OblíbenýmStep motor 0.28 nm
The 0.28nm stepper engine serves as an alternative replacement for SX17-1003VLQCEF engines. The engine is suitable for use on XYZ axes for extruder we recommend a stronger version.
Dočasně vyprodáno
zł59,33
-
Přidat k OblíbenýmStep motor 0.44 nm
Step motor with a thickness of 0.44 nm. The engine is suitable for use on XYZ axes for extruder we recommend a stronger version, but this engine can also be used.
Dočasně vyprodáno
zł50,83
-
Přidat k OblíbenýmStep motor 0.56 nm
The 0.56nm stepper engine serves as an alternative replacement for SX17-1005VLQCEF engines. The engine is suitable for use on all axes.
Dočasně vyprodáno
zł50,83
-
Přidat k OblíbenýmStepper motor 0.56Nm with integrated T8x8 trapezoid and nut
0.56 Nm stepping motor with integrated T8x8 trapezoidal screw - length 420 mm - including matching nut - it is recommended to replace the nut with a nut with a spring to limit the clearance. Thanks to the integrated screw, you don't have to use flexible couplings or connections with different tubes.
Dočasně vyprodáno
zł110,33
-
Přidat k OblíbenýmStep motor 0.42 Nm with trapezoid T8x8 and matrix
Step engine NEMA 17 with integrated trapezoidal screw T8x8 and nut. Available length of trapezoidal screw 300 mm, 400 mm, 500 mm. Matrix recommended replacing a nut with a spring to define clearance or plastic nut. Thanks to the integrated screw you do not have to use flexible clutches or joints with different hoses.
Dočasně vyprodáno
od zł93,33
-
Přidat k Oblíbeným
Step motor 0.42 nm with integrated trapezoid T8x2 and matrix
Step motor with a thickness of 0.42 Nm with integrated trapezoidal screw T8x2 - including the corresponding matrix - nuts recommended replacing a nut with a spring to define the clearance. Thanks to the integrated screw you do not have to use flexible clutches or joints with different hoses.
Dočasně vyprodáno
zł110,33
-
zł16,83
40%
Přidat k OblíbenýmStep motor 28byj-48
5 PIN Step Motor 28Byj -48 - 4 phases. Miniature step motor 28byj-48 with ULN2003 control circuit is suitable for many projects. Miniature dimensions, 12V power supply, LED indication.
Dočasně vyprodáno
zł10,03
zł16,83 Sleva 40.4%