HD PLA filament gray Fiberlogy 1.75 mm 850 g

HD PLA filament gray Fiberlogy 1.75 mm 850 g

HDPLA Fiberlogy is a special material that can be used in many ways as a replacement for ABS, but at a much easier printing.

33,20 € incl. VAT

Availability: 1-7 days

Producer: Fiberlogy

If you want to avoid all the inconveniences associated with printing ABS - such as the need for a heating pad material shrinkage unpleasant odor and inhaling dangerous fumes, we have good news for you.

Material HDPLA from Fiberlogy is resistant to shocks and high temperatures, like ABS, but is printed as conventional PLA. After printing is sufficient that the model has undergone annealing and obtains the desired properties.

The raw materials used in the production of HD PLA are safe for contact with food in accordance with the standards of the European Union. HD material PLA is also compliant with RoHS directive.

Weight strings: 0.85 kg
printing temperature: 200 ° C - 220 ° C
substrate temperature: 50 ° C - 70 ° C (it is not necessary for special types of washers or the use of means of increasing adhesion substrate, such as adhesive tape and the Kapton 3Dlac et al.)
diameter tolerance: +/- 0.02 mm
roundness tolerance: + 0.01 mm

HD PLA fiberlogy - Instructions annealing < / a>

first Print out your project.

• printing temperature: 200 DEG - 220 DEG C

• substrate temperature: 50 ° - 70 ° C

(heating pad is not necessary when using washers, strips or glue which enhances adhesion)

2. Before annealing Allow to cool after printing model (s supports a raft).

3. Copy should be placed in the middle chamber (oven), equally distant from the heating elements inside.

4. it gradually heated to a temperature of about 80C.

5. Žíhejte (bake) for about 15 minutes at 80C.

NB The temperature in the chamber (oven) must be accurately maintained. We recommend that you watch the temperature using a suitable digital thermometer inside the oven. The printout is needed during the heating process to guard. In the case of solid prints can gradually raise the temperature to 120 ° C or extend the time of annealing.

6. Upon completion of the annealing and remove the copy of the washer, which was placed in the chamber, and do not touch it until it has cooled (room temperature).

7. Remove the support and raft.

8. You can use the finished product, which received a similar mechanical strength and heat resistance of ABS to 140 ° C. The model at such a high temperature, it may soften but runny and keeps its shape.


is not recommended to first annealing products with thin walls and geometries with breadth expansion without support.

2. Check if the temperature in the oven corresponding to the actual temperature.

3. During the annealing process, there is less shrinkage of the product. Unfortunately, he can not be prevented. In our experience, it is about 1 mm to 10 cm. It is a kind of reconstruction of the internal structure of the material (change of crystalline structure, as it happens e.g. in steel during curing). The degree of shrinkage depends on the filling. The greater the filler, the smaller should be the shrinkage.

The subsequent grinding or otherwise modifying the model, you can achieve accuracy or offset the shrinkage model and print more.

4. Test procedure on a test printout before annealing of the final product.

Color: grey
Weight: 0,85 kg
Average: 1,75 mm
Diameter: ± 0,02 mm
Bed temperature: 0-70°C
Nozzle temperature: 200-220°C

New product question

* (Required)

Privacy preferences
We use cookies to enhance your visit of this website, analyze its performance and collect data about its usage. We may use third-party tools and services to do so and collected data may get transmitted to partners in the EU, USA or other countries. By clicking on 'Accept all cookies' you declare your consent with this processing. You may find detailed information or adjust your preferences below.

Privacy declaration

Show details
Our webpage stores data on your device (cookies and browser's storages) to identify your session and achieve basic platform functionality, browsing experience and security.
We may store data on your device (cookies and browser's storages) to deliver non-essential functions that improve your browsing experience, store some of your preferences without having an user account or without being logged-in, use third party scripts and/or sources, widgets etc.
Use of analytic tools enables us to better understand needs of our visitors and how they use our site. We may use first or third party tools to track or record your browsing of our website, to analyze tools or components you have interacted with or used, record conversion events and similar.
We may use cookies and third party tools to enhance products' and/or services' offer of ourselves or those of our partners, its relevancy to you, based on products or pages you have visited on this site or on other websites.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.