PLA filaments 1.75 mm black Devil Design 1 kg

PLA filaments 1.75 mm black Devil Design 1 kg

The print string Polish manufacturer Devil Design is offered in a wide variety of colors. The manufacturer guarantees the thickness of the print strings of +/- 0.05 mm.

20,72 € incl. VAT

Availability: 1-7 days

Producer: Devil Design

Black PLA is one of the most popular colors PLA from this manufacturer.

Material PLA is the most commonly used material for printing technology FDM , suitable for printing large objects.

1 kg of material is wound onto a spool and a transparent vacuum packed together with a desiccant in a cardboard box. Each package is loaded label with information about the recommended temperature settings for the print.

Outer coil diameter 200 mm, inner bore 52 mm, width 70 mm. Packaged bobbin weight 1.4 kg. Approximate length of the fibers in the package is 330 m.

Suitability PLA:

PLA is easily printed, is biodegradable (and thus environmentally friendly). But it is a material that is not suitable for outdoor use, degrades and becomes brittle when exposed to UV radiation. It is also heat resistant. Already at 30 - 50st C prints soften and deform. It is therefore not appropriate to carry copies in automobiles. PLA is a combustible material. Therefore, we recommend you do not leave the printer when printing with the material long-term unattended.

Finish PLA - the material can not be easily abraded by grinding (rubbing) generates heat that causes the "pulling" of the fibers printout. Therefore, it is suitable for manual grinding printout cool such that it will grind under water. For the same reason it is difficult to print drill holes (again problem with heating). The material should be sprayed first filler (used for modeling) and then sanded, sprayed again and again and again until the model for us, perfectly smooth and then sprayed with paint. The resulting model can also be inserted into the "omlílačky" along with shells, stones, pieces of filaments remains prints and get rid of unwanted bugs and debris aid under.

Bonding PLA : glue with activator spray (sometimes even themselves sufficient glue)

Recommended print settings PLA : To print just the use of commonly used nozzles (brass). The nozzle diameter is chosen according to the fineness of the surface of what we want to achieve or by force adjustment layers to print. This optimum setting exists recount formula, no less just simple rule + -0.2 mm - that if we want the layer thickness of 1.25 should not have a larger diameter than the nozzle 0.3 mm . At higher layers use a nozzle with a larger diameter at the weaker with less contrast.

Temperature Washers - keeps the heat is not required or only for better adhesion to the substrate material to the 50st. C. For even better fit to the base course recommended to use 3DLAC or glue. Generally, however, PLA material adheres well to the substrate without adhesive.

Recommended settings: Print Temperature: 208 ° , retraction of 0.8 mm, speed 60 mm / s (outline 70%) layer of 0.2 mm - 0 , 05 mm. When using a printer with the PEI film must be well degreased washer. The resultant printout is smooth and rather glossy without visible errors.

Print material PLA to support - appropriate support for copies are made of the same material ie PLA or PVA (voděrozpustný material) is not suitable for HIPS.

To Storage We recommend to ensure a dry environment. Under poor storage in humid environment will absorb moisture, which is manifested as bubbles during printing on the surface.

Color: black
Weight: 1 kg
Average: 1,75 mm
Diameter: ± 0,05 mm
Bed temperature: 50 - 60°C
Nozzle temperature: 200 - 235°C

New product question

* (Required)

Privacy preferences
We use cookies to enhance your visit of this website, analyze its performance and collect data about its usage. We may use third-party tools and services to do so and collected data may get transmitted to partners in the EU, USA or other countries. By clicking on 'Accept all cookies' you declare your consent with this processing. You may find detailed information or adjust your preferences below.

Privacy declaration

Show details
Our webpage stores data on your device (cookies and browser's storages) to identify your session and achieve basic platform functionality, browsing experience and security.
We may store data on your device (cookies and browser's storages) to deliver non-essential functions that improve your browsing experience, store some of your preferences without having an user account or without being logged-in, use third party scripts and/or sources, widgets etc.
Use of analytic tools enables us to better understand needs of our visitors and how they use our site. We may use first or third party tools to track or record your browsing of our website, to analyze tools or components you have interacted with or used, record conversion events and similar.
We may use cookies and third party tools to enhance products' and/or services' offer of ourselves or those of our partners, its relevancy to you, based on products or pages you have visited on this site or on other websites.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.